Jib track ordered!

Finally got my jib track ordered. Harken will deliver on the 27th of December. I hope to have this installed on the boat during Christmas break.

Ready for winter!

Finally happy with the finish Soling SWE102

Soling SWE 102 restoration

Test polish tonight. Pretty happy with the result

Cut the first holes in the deck...

Tiller and tiller extension installed

Tried to buy a clip for the tiller extension today... but living is a small town... No luck... went home and designed my own and are 3D printed it

A little more work on the tiller tonight. Installed rudder, and will finish up the install hopefully tomorrow.

Soling SWE102 restoration

Been working to much at work lately... Finally putting some time into my Soling restoration. Worked on the carbon fiber tiller and new stainless steel bracket today

Been working too much lately.. but finally got back at working on the mast support

Picture from the day I bought the boat, and today

Finally two coats of hard anti foul paint applied. SWE102 Soling

Two more coats of epoxy gel shield today. One more tomorrow. Should be it. Keel has 6 coats and hull 4 coats.

First coat of Epoxy primer applied tonight

5 hours worth of sanding and you can hardly tell... But the keel is ready for Epoxy paint now.

Worked on the keel tonight in the heated shed. Great to be able to hang the boat in hoist. Applied new fiberglass tot he keel before I called it the night.

Sanded the hull, to get rid of any imperfections in the paint. Will polish to make the hull look shiny again

3D printed guide for halyards through the mast foot

Jib rail drawing. I have sent this to Harken to get a quote

Sanding and polish of the paint will look pretty much like gelcoat.

Dry fit of mast support

Vang in the works

Mast foot drilled, mast support dry fit. Soling SWE 102